Get a Quote

CFIP PhoeniX M

Modular TDM / IP split mount radio system

Overview

CFIP PhoeniX M split mount system consists of PhoeniX M IDU and PhoeniX ODU (XPIC functionality supported). PhoeniX M IDU provides up to 63E1 and 2xSTM-1 bringing the total maximum capacity to 360 Mbps full duplex.

Interface Modules

GigE Master IO module with 2E1+4xEthernet

The GigE Master IO Module is a non-optional component for the CFIP PhoeniX M series IDUs. The module includes:

  • High performance Ethernet bridge with 4x10/100/1000Base-T ports with RJ-45 TP interfaces (requires Cat5e cables);
  • 2 x E1 ports (RJ-45);
  • SFP Module slot for 1000Base-T, 1000Base-SX, or 1000Base-LX modules;
  • Auxiliary port (64 kbps) Data Order Wire: RS422/RS232 via RJ45;

 

 Master Modules:

  • GigE Master IO module with 2E1+4xEthernet
  • Enhanced GigE IO module with 2E1+4xEthernet
  • Master IO module with 42E1
  • Standard IO module with 16E1+2xEthernet
  • Enhanced IO module with 16E1+2Ethernet
  • Carrier Ethernet master module with GE ports, STM-1 ports and 16x E1/T1

 

Expansion Modules:

  • STM-1 Optical Mini IO module
  • STM-1 Electrical Mini IO module
  • 16E1 Expansion IO module
  • Expansion IO module with 21E1
  • 2xSTM-1 SFP E module

 

Controller modules:

  • Controller module

 

Modem:

  • Unified modem/IF module

 

Power Supplies:

  • Power Supply module

 

 

Highlights and Benefits

High Capacity Throughput

Market-proven technology supporting 256 QAM modulation and 56 MHz channel bandwidth ensures a high throughput capacity of up to 63E1/T1 channels or 360 Mbps per radio.

Perfect For Network Upgrade

Flexible TDM/IP architecture allows easy transition from TDM-only (up to 63E1/T1 or 4xSTM-1) to hybrid (32E1/T1 + 5 x Gigabit Ethernet + 4xSTM-1) or IP-only (up to 9 x Gigabit Ethernet) network using single highly adjustable PhoeniX M device (per site).

Efficient Use of Available Spectrum

XPIC support enables 2+0 configuration using both polarizations in a single channel. In combination with link bonding it is possible to achieve 720 Mbps link capacity in single Gigabit Ethernet port.

Advanced Ethernet Functionality

Built-in managed Carrier Gigabit Ethernet switch supports advanced QoS, OAM, MEF 9&14, 1588v2 PTP and SyncE and other important features, allowing setting up and maintaining of extremely customized LTE-compatible end-user connectivity services.

Flexible Network Configuration

With Gigabit Ethernet, E1/T1 and STM-1 ports it is possible to install the system in various network topologies (for instance, ring, repeater chain, E1 SNCP ring) and configurations (up to 4+0 aggregation with built-in switching, 1+1 link protection in HSB/FD/SD, port-separated management).
 

Key Characteristics

  ETSI FCC
Capacity 348 Mbps
Frequency bands

6; 7; 8; 10; 11; 13; 15; 18; 23; 24; 26; 38 GHz

6; 11; 13; 15; 18; 23; 38 GHz
Modulations

QPSK, 16QAM, 32QAM,128QAM, 256QAM

Channel Bandwidth

7/14/28/40/56 MHz

5/10/20/30/40/50/56 MHz 

Form factor

IDU:

1U rack; 45x430x240 mm; 3.4kg

 

IDU:

1U rack, 1.77x16.92x9.44 inch; 7.5 lbs

Power consumption

IDU:20-30W

IDU:20-30W

  CFIP PhoeniX ODU CFIP PhoeniX IRFU
Antenna N-Type or flange A) N-Type or flange
B) SMA Tx and Rx ports5
IF to IDU

N-Type

SMA
RSSI BNC 2-port for multi-meter
Power --- (over IF port) 2-pin power port
(alternative to IF port)
Form factor 288x288x80mm; 3.5 kg /
11.34x11.34x3.15 inch; 7.72 lbs
19” 2U rack 90x430x260mm; 5.8 kg /
19” 2U rack 3.54x16.93x10.24 inch; 12.79 lbs
Power consumption 13-27W Standard radio power version; 21-39W High radio power version; 39-55W Very high radio power version

Downloads

Case Studies

9
IT Company GmbH Phoenix-M Case Study

Connecting E.ON Climate & Renewables offshore wind farm in the North Sea

SAFCaseStudy_Phoenix-M_IT Company_Offshore.pdf
3.2 MB
SP_Connect_Nuclear_plants

Spain - connectivity of nuclear plants with CFIP-108

20110524_SP_Connect_Nuclear_plants.pdf.pdf
1.5 MB
AU_Utility_CFQ_CS

Australia - Utility network

20100722_AU_Utility_CFQ_CS.pdf
1 MB
AU_Municipal_Network_CFIP_CFQ_CFM_CFOL_CS

Australia - Municipal network

20100222_AU_Municipal_Network_CFIP_CFQ_CFM_CFOL_CS.pdf
1.6 MB
NZ_Backhaul_project_CFQ_CS

New Zealand - CFQ backhaul project

20090825_NZ_Backhaul_project_CFQ_CS.pdf
0.3 MB
IE_Municipal_Network_CFM_CFQ_CS

Ireland - Municipal network solution

20090715_IE_Municipal_Network_CFM_CFQ_CS.pdf
0.9 MB
FK_PDH_Backbone_WiMax_CFM_CFQ

Falkland - PDH backbone for WiMax

20090708_FK_PDH_Backbone_WiMax_CFM_CFQ_CS.pdf
0.6 MB
NZ_SDH_Solution_CFQ_CS

New Zealand - SDH solution

20090708_NZ_SDH_Solution_CFQ_CS.pdf
1.5 MB
TJ_GSM_Backhaul_CFM_CFQ_CS

Tajikistan - GSM Backhaul solution

20090223_TJ_GSM_Backhaul_CFM_CFQ_CS.pdf
1.6 MB

Datasheets

2

Pictures

1

Product Brochures

3

RMA

1

Solutions

4

Visio Stencils

1

Whitepapers

4
Link Aggregation - internal and external Link_Aggregation 2016 Sep.pdf 1.9 MB
Minimum Angle Interference SAF '2013

This whitepaper assesses basic practical aspects and SAF recommendations of interference avoidance commonly queried by engineers, i.e., what minimum angle is required between microwave links sharing the same site in order to reuse the same frequency.

20130110_Minimum Angle Interference_White_Paper_SAF_2013.pdf
141.2 KB
Truth about the real capacity

In this whitepaper SAF gives insight what is real capacity and what could be defined as a marketing manipulation

20110829_Truth_about_ the real_capacity.pdf
0.5 MB
Licensed and unlicensed

Licensed and Unlicensed wireless whitepaper

20100604_Licensed_and_Unlicensed_whitepaper.pdf
0.9 MB

Accessories

TNC to N type Cable

AC/DC Power Supply

Ethernet patch cable

Antennas

SAF Tehnika offers full spectrum of high quality directional solid (grid – where applicable) parabolic antennas of all commercially available sizes and frequencies made by world’s leading manufacturers. All standard antennas are fully integrated for use with radio units manufactured by SAF Tehnika. We also offer all kinds of passive components, such as couplers (integrated/stand-alone), OMTs, four-way transducers, for aggregated and protected links, as well as antennas and accessories (flexible waveguides, remote-mounting brackets, flange-to-N adapters, coaxial cables etc) for solutions where direct mounting of SAF radios is not provided. To select an appropriate antenna according to your climate zone and many other parameters, please, contact your sales representative.