Get a Quote

CFIP PhoeniX

Split Mount Radio System

Intended for classic telecom architecture

CFIP PhoeniX split mount system is designed to fit in a classic telecom architecture with a radio located outdoor and a sheltered indoor unit. CFIP PhoeniX also enables transition from TDM networks to hybrid TDM/IP networks providing up to 20E1 + GigE. Total maximum capacity is up to 366 Mbps full duplex.

Highlights and Benefits

High Capacity Throughput

Market-proven technology supporting 256 QAM modulation and 56 MHz channel bandwidth ensures a high throughput capacity of up to 20E1 channels or 363 Mbps per radio.

Flexible network configuration

With four Gigabit Ethernet ports it is possible to install the system in various network topologies (for instance, ring, repeater chain) and configurations (aggregation, 1+1 link protection in HSB/FD/SD, port-separated management).

Low Power Consumption

Modern components and latest technologies applied in CFIP PhoeniX make it one of the most energy efficient equipment currently on the market of licenced-bands microwave radio systems.

Excellent for network upgrade

Flexible TDM/IP architecture allows easy transition from TDM-only to hybrid or IP-only network using single highly adjustable PhoeniX device (per site).

Industrial grade design

Fanless cooling system and split mount architecture makes CFIP PhoeniX highly reliable, maintenance free and conveniently scalable digital microwave radio.

Enhanced Ethernet functionality

Built-in managed Gigabit Ethernet switch supports QoS, up to 4093 concurrent VLANs, 9728 bytes jumbo frames and other essential features, which allow to setup and maintain highly customized end-user connectivity services.
 

Key Characteristics

  ETSI FCC
Capacity Up to 363 Mbps
Frequency bands 6; 7; 8; 10; 11; 13; 15; 18; 23; 26; 30; 32; 38 GHz 6; 7; 11; 13; 15; 18; 23; 38 GHz
Modulations 4QAM, 16QAM, 32QAM, 64QAM, 128QAM, 256QAM
Channel Bandwidth

3.5/7/14/28/40/56 MHz

5/10/20/30/40/50/56 MHz
Form factor

IDU:

1U rack; 45x430x240 mm; 3.1 kg

IDU:

1U rack; 1.77x16.92x9.44 inch; 6.83 lbs

Power consumption

IDU: 20-30W

  CFIP PhoeniX ODU CFIP PhoeniX IRFU
Antenna N-Type or flange A) N-Type or flange
B) SMA Tx and Rx ports5
IF to IDU

N-Type

SMA
RSSI BNC 2-port for multi-meter
Power --- (over IF port) 2-pin power port
(alternative to IF port)
Form factor 288x288x80mm; 3.5 kg /
11.34x11.34x3.15 inch; 7.72 lbs
19” 2U rack 90x430x260mm; 5.8 kg /
19” 2U rack 3.54x16.93x10.24 inch; 12.79 lbs
Power consumption 13-27W Standard radio power version; 21-39W High radio power version; 39-55W Very high radio power version

Downloads

Case Studies

3

Datasheets

4

Pictures

1

Product Brochures

3

RMA

1

Visio Stencils

1

Whitepapers

4
Link Aggregation - internal and external Link_Aggregation 2016 Sep.pdf 1.9 MB
Minimum Angle Interference SAF '2013

This whitepaper assesses basic practical aspects and SAF recommendations of interference avoidance commonly queried by engineers, i.e., what minimum angle is required between microwave links sharing the same site in order to reuse the same frequency.

20130110_Minimum Angle Interference_White_Paper_SAF_2013.pdf
141.2 KB
Truth about the real capacity

In this whitepaper SAF gives insight what is real capacity and what could be defined as a marketing manipulation

20110829_Truth_about_ the real_capacity.pdf
0.5 MB
Licensed and unlicensed

Licensed and Unlicensed wireless whitepaper

20100604_Licensed_and_Unlicensed_whitepaper.pdf
0.9 MB

Accessories

AC/DC Power supply 80W

Patch cable STP Cat6

Lightning arrester

Lightning arrester

CFIP IDU 1+1 Protection cables kit

Antennas

SAF Tehnika offers full spectrum of high quality directional solid (grid – where applicable) parabolic antennas of all commercially available sizes and frequencies made by world’s leading manufacturers. All standard antennas are fully integrated for use with radio units manufactured by SAF Tehnika. We also offer all kinds of passive components, such as couplers (integrated/stand-alone), OMTs, four-way transducers, for aggregated and protected links, as well as antennas and accessories (flexible waveguides, remote-mounting brackets, flange-to-N adapters, coaxial cables etc) for solutions where direct mounting of SAF radios is not provided. To select an appropriate antenna according to your climate zone and many other parameters, please, contact your sales representative.