Get a Quote

CFIP 106/108

ALL-OUTDOOR RADIO SYSTEM

Intended for IP networks providing Fast Ethernet interface

CFIP-106/108 is primarily designed for IP networks and provides Fast Ethernet interface with capacities from 8 Mbps up to full duplex 100 Mbps Fast Ethernet. In addition to that, CFIP-108 has a 4xE1 port for legacy equipment connectivity and for use in hybrid TDM/IP networks.

Highlights & Benefits

Excellent System Performance

High system gain allows efficient upgrade of PDH radios to hybrid 108Mbps capacity without increasing antenna size. CFIP 106/108 is fit for high availability and high density deployments thanks to ACM and ATPC support

Low Power Consumption

Use of high quality components and energy efficient technologies significantly reduce running electricity costs. The radio can be easily powered by alternative energy sources such as solar panels and wind turbines.

Compact All-outdoor Form Factor

Managed Fast Ethernet switch, high performance modem and radio of CFIP 106/108 are built into a small form factor all-outdoor radio casing, making it ideal for hybrid wireless network installations with Ethernet and E1 connectivity.
 

Key Characteristics

  ETSI FCC
Capacity Up to 108 Mbps Up to 106 Mbps
Frequency bands 6; 7; 8; 10; 11; 13; 15; 17; 18; 23; 24; 26; 38 GHz 6; 11; 13; 15; 18; 23; 24; 38 GHz
Modulations 4QAM, 16QAM, 32QAM, 64QAM, 128QAM (for 10 MHz only)
Channel Bandwidth 7/14/28 MHz 10/20/30 MHz
Interfaces 10/100 Ethernet & 4E1/T1
Traffic Ethernet only; Eth+1E1/T1 to Eth+4E1/T1
Form factor 288x288x80 mm; 3.5 kg 11.2x11.2x3.1 inch; 7.7 lbs
Power consumption

22-33W Standard radio power version;

38-45W High radio power version

Downloads

Case Studies

6
Australia_Clubs_Resorts network_CFIP108_CFIP Lumina

Australia – Clubs & Resorts network

20121126_Australia_Clubs_Resorts network_CFIP108_CFIP Lumina.pdf
0.6 MB
SP_Connect_Nuclear_plants

Spain - connectivity of nuclear plants with CFIP-108

20110524_SP_Connect_Nuclear_plants.pdf.pdf
1.5 MB
USA_ISP_Network

USA - WISP network upgrade using CFIP-106 and CFIP Lumina

20101208_USA_ISP_Network.pdf
1.8 MB
USA_Backbone_upgrade

USA - Network backbone upgrade using CFIP Lumina and CFIP-106

20100505_USA_Backbone_upgrade.pdf
0.4 MB
AU_Municipal_Network_CFIP_CFQ_CFM_CFOL_CS

Australia - Municipal network

20100222_AU_Municipal_Network_CFIP_CFQ_CFM_CFOL_CS.pdf
1.6 MB
MZ_WiMax_Project_CFIP-108_CS

Mozambique - WiMax project with SAF CFIP-108 FODU

20090708_MZ_WiMax_Project_CFIP-108_CS.pdf
158.8 KB

Pictures

1

Product Brochures

4

RMA

1

Solutions

3

Visio Stencils

1

Whitepapers

5
Link Aggregation - internal and external Link_Aggregation 2016 Sep.pdf 1.9 MB
Minimum Angle Interference SAF '2013

This whitepaper assesses basic practical aspects and SAF recommendations of interference avoidance commonly queried by engineers, i.e., what minimum angle is required between microwave links sharing the same site in order to reuse the same frequency.

20130110_Minimum Angle Interference_White_Paper_SAF_2013.pdf
141.2 KB
Truth about the real capacity

In this whitepaper SAF gives insight what is real capacity and what could be defined as a marketing manipulation

20110829_Truth_about_ the real_capacity.pdf
0.5 MB
Licensed and unlicensed

Licensed and Unlicensed wireless whitepaper

20100604_Licensed_and_Unlicensed_whitepaper.pdf
0.9 MB
FODU Advantages, CAPEX & OPEX

Whitepaper of Full Outdoor advantages, CAPEX & OPEX (English)

FODU-Advantages_CAPEX-OPEX.pdf
0.5 MB

Accessories

Power over Ethernet injector

AC/DC Power supply 60W

RJ-45 connector case

18-pin cable connector

BNC connector

Twin BNC connector

Twin BNC to DB9 cable

Lightning Protection for RJ45, Outdoor

Lightning arrestor for Ethernet cable

Lightning arrestor for E1 cable

Antennas

SAF Tehnika offers full spectrum of high quality directional solid (grid – where applicable) parabolic antennas of all commercially available sizes and frequencies made by world’s leading manufacturers. All standard antennas are fully integrated for use with radio units manufactured by SAF Tehnika. We also offer all kinds of passive components, such as couplers (integrated/stand-alone), OMTs, four-way transducers, for aggregated and protected links, as well as antennas and accessories (flexible waveguides, remote-mounting brackets, flange-to-N adapters, coaxial cables etc) for solutions where direct mounting of SAF radios is not provided. To select an appropriate antenna according to your climate zone and many other parameters, please, contact your sales representative.